Home > Learning Center > Snow Blower Repair

Snow Blower Repair

Snow Blower Repairs are needed when your Snow Blower goes on the fritz. One problem with the design of the snow blower is that snow can build up in the auger, jamming it and stalling the motor. This is complicated by the fact that the auger may deform before applying enough resistance to the motor to stop it.

 If the jam is cleared with a hand, it is possible for the auger to return to its natural shape suddenly and with great force, possibly injuring the user.  Snow blowers are a leading cause of traumatic finger amputations. The correct procedure is to stop the engine, disengage the clutch and then clear the jam with a broom handle or other long object.

Most modern machines mitigate this problem by including a safety system known as the Dead man's switch. This may be electrical as implied or mechanical in design, such as a lever. In some jurisdictions, this is a mandatory requirement.

Snow Blower | Snow blower parts | Learning Center | Site Map | Links | Contact | Home

Copyright © 2010